All Flushmaster orders come with (1) hose for each outlet in the length of hose you select when purchasing. Choose from 5ft, 7ft, 9ft, 12ft, 15ft, or 20ft hose. If you order a 2-outlet Flushmaster it comes with (2) hoses. If you order a 4-outlet Flushmaster it comes with (4) hoses.

Note: You only need to order extra hose if you need more length or to replace a hose.

This depends on your setup. If you trailer your boat, shorter hoses may suffice. If mounted on a dock, you may need longer hoses. For portable use, shorter hoses may be sufficient. Consider the distance from each outboard to the Flushmaster.

Yes! All Flushmaster fittings are compatible with standard garden size hoses.

There are (2) female quick connectors in your Yamaha or Honda kit because (1) will live on the outboard connected to the male side, permanently. The other will be attached to your hose.

Yamaha Video
Honda Video

No! Flushmaster sequentially sends water through each outlet one at a time. Each outlet is numbered and programmed to flush for the set amount of time before moving to the next.

No! Using the flush port/plug on your outboard does not require running the engine while flushing. Running the engine while flushing can lead to damage.

Yes. Attach the solution applicators to the end of the hose that connects to the outboard motor. Each outboard will then receive the solution. Ensure an individual applicator is used for each line.

No! Press start and walk away. Flushmaster will block the water flow upon completion.

The hoses connect to the Flushmaster device through the male barbs attached to the device outlets. Clamps and male barbs are included for both ends of the hoses.

Flushmaster runs on (3) AA batteries. No need for electrical plugs.

Note: Use good quality batteries from an established business.

No. Quick Connects are a separate purchase. Flushmaster orders include the device, outlet hoses, batteries, screwdriver, instructions, and warranty.

Water coming out of your Mercury quick connect cap indicates debris or an issue with your check valve. The OEM flush plug cap's inverted design makes it hard to see water discharge, as the water exits through recessed holes. Our Mercury cap, also designed a hole, extends outward from the engine, providing a clearer visual cue of check valve failure. This makes it easier to notice water coming out of the hole compared to the OEM cap, giving you a chance to address it before it becomes a problem.Watch this video for more info

TROUBSHOOTING VIDEO >

Water coming out of your Mercury quick connect cap indicates debris or an issue with your check valve. The OEM flush plug cap's inverted design makes it hard to see water discharge, as the water exits through recessed holes. Our Mercury cap, also designed a hole, extends outward from the engine, providing a clearer visual cue of check valve failure. This makes it easier to notice water coming out of the hole compared to the OEM cap, giving you a chance to address it before it becomes a problem.
Watch this video for more info

TROUBSHOOTING VIDEO >

You need the Flushmaster 2-outlet, 2 quick connect kits, and any accessories for housing or storage. Choose the Flush Port Quick Connect compatible with your outboards and determine the hose length based on your application.

You need the Flushmaster 4-outlet, 3 quick connect kits, and any accessories for housing or storage. Choose the Flush Port Quick Connect compatible with your outboards and determine the hose length based on your application.

Yes. If your flush ports have been rerouted to your splash well, like Seahunt, you can use the Flush Port Quick Connect for Suzuki.

Video >

Call us at (833) 201-0556.

Return Shipping Address:

• Seamule LLC
• 6795 58th Ave N
• St Petersburg, FL 33709