
Reroute Install Kit
SM-FMRIK12
Mercury V10: required part 8M0192180. This Mercury male fitting connects to the engine cooling system. You cannot complete a Mercury V10 Reroute installation without it. It is not included with the Reroute plate or Reroute Install Kit. Source it separately through a Mercury parts supplier before installation.
Supplied as listed: 25 ft of hose per kit. We do not pre-cut hose or adjust kit contents for shorter runs.
Do not cut the hose before installation. You can trim it to fit, but we strongly recommend waiting until you have confirmed the full route through the engine, rigging tube, transom, bilge and any other routing points. A straight-line or bird’s-eye measurement can underestimate the length needed. Allow for bends, connections and engine movement before cutting.
WHAT’S INCLUDED
CHECK YOUR HOSE SIZE
Free Domestic Shipping
Fast, Reliable Customer Support
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.

WHAT’S INCLUDED & SPECS
WHAT’S INCLUDED
SPECIFICATIONS
SIZE & COMPATIBILITY
INSTALLATION & SAFETY
ONE INSTALLATION KIT PER ENGINE
HOW MANY KITS DO YOU NEED?
For a new Reroute installation, pair one plate with the number of kits shown below. Select the hose size that matches each engine’s approved connection and the plate’s barb size.
SINGLE ENGINE
1 Reroute Install Kit
Pair with (1) Single Outlet Flush Port Reroute, sold separately.
TWIN ENGINES
2 Reroute Install Kits
Pair with (1) Dual Outlet Flush Port Reroute, sold separately.
TRIPLE ENGINES
3 Reroute Install Kits
Pair with (1) Triple Outlet Flush Port Reroute, sold separately.
QUAD ENGINES
4 Reroute Install Kits
Pair with (1) Quad Outlet Flush Port Reroute, sold separately.
REAL INSTALLATION EXAMPLES
SEE WHERE THE KIT GOES
General examples from the installation guide. Engine layouts and connection methods vary. Have a qualified marine technician confirm the correct flush line and connection point before cutting or modifying anything.
FAQs
What extra part is required for Mercury V10 engines?
Mercury V10: required part 8M0192180. This Mercury male fitting connects to the engine cooling system. You cannot complete a Mercury V10 Reroute installation without it. It is not included with the Reroute plate or Reroute Install Kit. Source it separately through a Mercury parts supplier before installation.




